A Study on The Influence of Core Structure PLA/TPU with Miura Origami on Energy Absorption in Sandwich Composites

To improve energy dissipation during impact on a 3D printed material, this study introduced a preliminary study on sandwich structure of PLA/TPU under impact loading. The sandwich structure used an origami structure as the main core to improve energy absorption during impact. The energy absorption characteristics were analyzed using Finite Element Methods (FEM) and further validated using experimental methods. In this study, we used a Miura as the core for the sandwich structure. The fabrication method was fused deposition modelling (FDM). The experiment impact test result indicated that the sandwich structure using the Origami structure absorbed approximately 25 % of the impactor energy. Comparing this experimental result to the FEM revealed an error rate of less than 5%. Based on our numerical and experimental methods, we found that the wall thickness of the origami core structure significantly impacts the absorbed energy. Increasing the core wall thickness twice from the original design increases energy absorption to approximately 89%. This demonstrates the validity of the FEM to predict the experimental outcome. The influences of the core thickness on the response of the overall structure led to optimal design, maximizing the energy dissipation in the 3D-printed sandwich structure.