Answers are grounded in this paper and cite their sources.
Experimental assessment shows improved mechanical and hygrothermal behavior in compressed earth blocks, suggesting enhanced performance for sustainable construction.
This study experimentally investigates the mechanical and dynamic hygrothermal be-havior of compressed earth block (CEB) walls subjected to simulated climatic cycles representative of a tropical humid environment. Four formulations were tested: raw soil (D0), soil + kenaf fibers (DF), soil + fibers + cement (DFC), and soil + fibers + cement + slag (DFCL). Performance was assessed in an instrumented bi-climatic cell, enabling the de-termination of thermal and hygroscopic attenuation factors and time lags, comple-mented by standardized uniaxial compression and three-point bending tests. The results indicate that DFCL achieved a compressive strength of about 10 MPa, nearly twice that of DF (~6 MPa), exceeding the threshold required for buildings up to R+1. Regarding hygrothermal behavior, DFCL exhibited the highest thermal attenuation factor (2.24) and a hygroscopic attenuation factor of 2.05, with corresponding time lags of ~0.9 h (thermal) and ~1.1 h (hygroscopic). These performances highlight superior thermal in-ertia and moisture regulation, well-suited for the constraints of tropical humid climates. Overall, the findings confirm the potential of kenaf fiber–reinforced, cement–slag stabi-lized CEBs as a sustainable construction solution, particularly for load-bearing walls in hot and humid regions.
No takes yet. Share an insight, caveat, or question.
Laibi et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: