Answers are grounded in this paper and cite their sources.
True triaxial tests reveal flow rates significantly influence fracture propagation and energy dynamics.
Hydraulic fracturing enhances coal seam permeability and improves coalbed methane extraction. This study investigates acoustic emission characteristics and fracture propagation in coal samples under different injection flow rates (30, 40, 50, and 60 ml/min) using true triaxial experiments. Results show that rupture pressures increase with flow rates, reaching 1.759, 2.1256, 3.1378, and 4.1608 MPa, indicating enhanced crack initiation under higher flows. AE energy and duration follow power-law distributions, with energy exponents decreasing from 0.83 to 0.65 and duration exponents from 0.88 to 0.62, suggesting more intense fracture propagation and concentrated energy release at higher flows. AE amplitude exhibits a linear distribution, with higher slopes at increased flow rates, correlating with more high-amplitude events. Frequency analysis reveals that at 30 and 40 ml/min, peak frequencies concentrate in bands I (0–120 kHz; 45.8% and 51.6%) and III (200–350 kHz; 43.8% and 39.4%). At 50 and 60 ml/min, frequencies predominantly fall in band I (58.1% and 57.9%), indicating lower-frequency energy release. AE location data demonstrate dispersed, slow crack growth at low flow rates, driven by microcrack accumulation, whereas higher flows promote rapid, concentrated fracture propagation near the outlet, favoring fracture network formation. These findings highlight the influence of flow rate on fracture dynamics and energy distribution, aiding optimization of hydraulic fracturing in coalbed methane extraction.
No takes yet. Share an insight, caveat, or question.
Qian et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: