Answers are grounded in this paper and cite their sources.
This analysis reveals how anisotropic porous media reduce friction drag in turbulent flow, suggesting applications in aircraft engineering.
In-flight turbulent friction drag is the main surface resistance for large aircraft. Thus, developing effective turbulent drag control methods is vital in engineering and science. Anisotropic porous materials, as novel materials, offer new approaches for addressing challenges relating to turbulence resistance reduction technology. This study employs hot-wire anemometry and time-resolved particle image velocimetry (TR-PIV) to investigate the resistance reduction control effect of a normal direction-prioritized anisotropic porous medium on the boundary layer of a flat panel under different incoming flow velocities. The experimental results show that the normal direction-prioritized anisotropic porous medium significantly reduces the frictional resistance on the surface of the flat panel. At an incoming flow velocity of U ∞ =13 m/s, the local maximum resistance reduction rate reaches 19.7%. The hot-wire measurements reveal that, after applying the normal direction-prioritized anisotropic porous medium, the velocity gradient near the wall is reduced and the wall friction velocity is decreased. The PIV results further indicate that applying the porous medium significantly increases the turbulent boundary layer thickness, lifts near-wall vortex structures, disrupts large-scale vortex structures, reduces wall-averaged shear stress, and enhances the fluctuations in turbulence intensity. Additionally, the large-scale high-speed streak structures are effectively broken down and their formation is suppressed, leading to a significant drag reduction effect.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: