Answers are grounded in this paper and cite their sources.
New method enhances target localization accuracy in mines with electronic fuses, suggesting better use of nonlinear radar technologies.
For nonlinear radars of remote search mine with electronic fuses, a mandatory function after detecting this type of nonlinear scatterer is to determine its coordinates. At the same time: 1) target localization equipment should be basically the same as detection equipment; 2) sensing should be in the range of 200-1000 MHz with a band of about 10% due to the dimensional limitations of the carrier and the frequency-spatial properties of mines with electronic fuses; 3) it has to be used to determine range and bearing Pulse-time methods are used to make measurements based on the first received radio pulse, due to re-reflections from the interface of media and surrounding objects; 4) it is necessary to take into account the specifics of the interaction of the pulsed probing signal with a nonlinear scatterer at frequencies of even nonlinear products associated with a priori unknown polarities of the inclusion of nonlinear elements of mine. As a result of these limitations, primarily frequency limitations, traditional monopulse radar methods do not allow for target localization accuracy of better than 1.5 meters, which is insufficient for practice. Aim – the search for a new method that makes it possible to ensure the accuracy necessary for practice in determining the coordinates of nonlinear scatterers – mines with electronic components detected by a nonlinear radar. A new method of synchronous processing of the received signal in the receiver of a single-frequency or two-frequency nonlinear radar is proposed, which allows, with an increase in the number of processed radio pulses, to simultaneously improve the signal-to-noise ratio and resolution parameters when determining the range to a nonlinear scatterer , which allows using time-pulse methods for determining the target location with the necessary accuracy. The new method can be applied to nonlinear single-frequency or dual-frequency remote mine search radars with electronic fuses with localization of the detected mine location.
No takes yet. Share an insight, caveat, or question.
Babanov et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: