This study introduces a novel approach to enhance the sustainability of road pavement construction by utilizing palm oil clinker (POC), an industrial waste product, as a replacement for fine aggregates (passing 4.75 mm) in stone mastic asphalt (SMA) mixtures. Departing from conventional practices, this research comprehensively evaluates the feasibility of using POC at varying replacement levels (0% to 100%) across a range of binder contents (5.0% to 7.0%). A significant contribution of this work is the application of Response Surface Methodology (RSM) to optimize the proportions of POC and binder content (BC), achieving target Marshall and volumetric properties for superior pavement performance. The results demonstrate that POC can effectively substitute fine aggregates in SMA mixtures, meeting all requirements for Marshall stability, flow, stiffness, and volumetric properties, even at a 100% replacement rate. Statistical analysis using RSM confirmed the model’s validity, exhibiting a high R-squared value (>0.80), significant p-values, and an adequate precision exceeding 4. Optimization analysis revealed that a 60% POC content with a 6% BC yields the most desirable combination for achieving optimal SMA mixture characteristics. Further validation through experimental testing showed a strong correlation with the theoretical RSM predictions, with an error margin below 5%. This research underscores the potential of POC as a sustainable alternative to traditional aggregates, paving the way for more environmentally friendly and cost-effective road construction practices while simultaneously addressing waste management challenges in the palm oil industry.
Babalghaith et al. (Mon,) studied this question.