A Modulated Marx Generator Capable of Outputting Quasi-Square Waves

A pulse generator capable of outputting quasi-square-wave pulses at the hundred-nanosecond scale is designed. With the development of high-power microwaves, the pulse flat-top is required to be more and more stable. However, at the hundred-nanosecond scale, an equal-value pulse-forming network is prone to being affected by stray parameters in the output waveform. To meet this requirement, a Marx generator and an anti-resonant network is used as the pulse boosting component and the pulse modulation component, respectively. Taking advantage of the anti-resonant network’s fewer sections and good modulation effect, the output waveform of the Marx generator is improved. The modulation ability of two-section and three-section modulation networks on waveforms, the output characteristics of two-section modulation networks, and the effect of stray parameters on the modulation network are explored. The experimental results show that both networks were able to achieve a quasi-square waveform of 100 kV on a 50 Ω load. Compared to the two-section network (165 ns pulse width, 41 ns rise time, 54.54% waveform flatness), the proposed three-section network achieves a pulse width of 185 ns with faster rise time (25 ns) and better waveform flatness (63.78%). Both topologies generate 100 kV quasi-square pulses on 50 Ω loads, with the three-section design demonstrating superior waveform control. In the repetition experiment, the pulse power source achieved stable operation at a repetition frequency of 20 Hz, and a quasi-square waveform with an output voltage of 100 kV was obtained. Finally, compared with previous studies, the modulated Marx generator based on an anti-resonant network has better waveform modulation effect and fewer network sections when generating a Square wave pulse of 100–200 ns.