Design of Pixelated Wideband Metasurface Absorber Using Transfer Learning and Generative Adversarial Networks

In this paper, a wideband metasurface absorber is proposed by utilizing transfer learning and a conditional deep convolutional generative adversarial network (CDCGAN). This approach involves introducing a forward prediction neural network to predict the spectral curve of a metasurface absorber, as well as a generative adversarial network for the inverse design of a metasurface absorber. After comparing different pre-trained models, a transfer learning network (TLN) based on GoogleNet-InceptionV3 is incorporated into the design process to reduce the amount of training data required. Based on the pixelated metasurface with a common effect of metallic pixels and resistive film pixels, a broadband electromagnetic absorber was designed through the CDCGAN model. For the application target of the C-band, a pixelated broadband metasurface Absorber I has been designed, which can achieve an absorption effect of less than −8 dB in the range of 6.5–8 GHz, and the absorption performance reaches less than −15 dB near the resonant frequency point of 7 GHz. Further lightweight optimization design was carried out, and the metasurface Absorber II was designed for application in the X-band, which has an absorption bandwidth below −8 dB at 9–12 GHz. The reflectivity curve measured by the experiment is in good agreement with that of the simulation result. Of note, our methodology aims to reversely engineer suitable absorbing structures based on customer-defined spectrums, which may bear some significance to the rapid design of broadband metasurface absorbers.