Effects of Cooling Rate and Solid Fraction on α-Al Phase Evolution in Rheo-Die Casting: Phase-Field Simulation and Experimental Investigation

This study aims to bridge the critical knowledge gap in understanding the dynamic microstructural evolution during high-solid-fraction semi-solid rheo-die casting process, including slurry preparation (0.1–0.3 K/s) and rheo-die casting (10–150 K/s). A novel phase-field model coupling continuous cooling with explicit nucleation was developed, enabling the dynamic simulation of continuous solidification microstructure evolution, considering two-stage cooling rate transition characteristics. Integrated the Swirled Enthalpy Equilibration Device (SEED) slurry preparation and graded-cooling mold experiments established variable cooling rate and solid fraction conditions for quantitative analysis of α-Al morphological evolution during rheo-die casting solidification. Through experimental and simulation investigations of the Al-7Si alloy, it is concluded that during Stage I slurry preparation, the primary α1-Al phase coarsened due to Ostwald ripening. In Stage II rheo-die casting, primary α1-Al undergoes continued growth under a moderate cooling rate (15 K/s). Meanwhile, secondary α2-Al formation exhibits a cooling-rate and solid fraction dependence: a high cooling rate (150 K/s) promotes explosive nucleation with the volume fraction decreasing from 4.78% to 0.33% as the solid fraction rises, whereas a mid-cooling rate (15 K/s) substantially suppresses its formation. Mechanistically, a high cooling rate promotes solute trapping, which intensifies constitutional undercooling, thereby elevating both the nucleation and growth driving forces to facilitate the formation of secondary α2-Al, whereas higher solid fractions restrict secondary phase formation by narrowing the solidification windows from 22 °C to 7 °C.