Answers are grounded in this paper and cite their sources.
This system improves tool-path generation for complex shapes using STL-format CAD models, highlighting 5-axis indexing for efficiency.
This study proposes a system for generating efficient tool paths for complex shape machining using a standard triangulated language (STL)-format CAD model as input. As the STL format represents the surface of a three-dimensional shape as a collection of triangular meshes, it is a generic data format independent of CAD software, ensuring compatibility between different systems. The proposed system introduces a new tool-path generation algorithm to overcome the limitations of conventional scanning and achieve the high-precision and efficient machining of complex shapes. To accommodate complex geometries, including overhangs, this study incorporates 5-axis indexing machining, enabling multidirectional machining. Furthermore, the system performs shape simulation simultaneously with tool-path generation, enabling the identification of material removal regions and the elimination of unnecessary tool paths, thereby reducing machining time. A major challenge in this approach is the increased computational cost owing to the large number of iterative calculations required. To address this, this study utilizes parallel computation with a graphics processing unit to accelerate tool-path generation and air-cut detection, significantly reducing analysis time. Finally, this study conducted a case study to validate the effectiveness of the proposed system. Using an STL-format CAD model of a product shape, this study generated a numerical control program with the proposed system and performed actual machining. The results of the case study confirmed that the target CAD model could be machined without any issues.
No takes yet. Share an insight, caveat, or question.
Matsukawa et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: