Answers are grounded in this paper and cite their sources.
Multi-axial forging at 300 °C modifies martensitic transformation temperatures and inelastic properties in TiNi-based alloy, suggesting durable performance.
The paper studies the effect of multi-axial forging (abc pressing) at 300 °C on the temperatures of martensitic transformations and inelastic properties (superelasticity and shape memory effects) of Ti49.8Ni50.2 (at. %) alloy samples. It is found that after abc pressing, the starting temperature of the B2→R direct martensitic transformation remains virtually unchanged and is equal to 63±1 ºС. At the same time, the finishing temperature of the direct martensitic transformation in B19′ structure decreases by 41 ± 1 °С; the temperatures of the start and finish of the B19′→B2 reverse martensitic transformation decrease by 18 and 13 degrees, respectively. The results demonstrate that after abc pressing at 300 °C, the alloy samples retain their inelastic properties and their value (regardless of given true strain) is comparable with the value of the inelastic properties of the samples in the coarse-grained state. It is shown that in all the studied samples the maximum value of reversible inelastic strain reaches ~ 18 % and is observed at 16 – 24 % of the plastic torsional strain specified for the samples.
No takes yet. Share an insight, caveat, or question.
Gusarenko et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: