Answers are grounded in this paper and cite their sources.
This study examines the influence of coal gangue and GGBFS on the mechanical properties of geopolymers, indicating performance variations.
The reuse of coal gangue (CG) and ground-granulated blast furnace slag (GGBFS) to synthesize geopolymers presents a sustainable strategy for industrial waste recycling. This study investigates the influences of various GGBFS/CG mixtures on the mechanical behavior and microstructure of the synthesized geopolymers. Results show that the geopolymer matrix is composed of calcium aluminosilicate (C-(A)-S-H) and sodium aluminosilicate (N-A-S-H) hydrates, which is essential for enhancing the compressive strength of the specimens. With 100% GGBFS, the geopolymer matrix sets in 17 min, reaching a compressive strength of 107.55 MPa after 28 days. As the CG content increases, both compressive strength and compactness decrease gradually, while the setting time prolongs. When the GGBFS/CG mass ratio is 1:1, the specimens’ setting time increases by 64.7% (from 17 to 28 min). The corresponding compressive strengths at 3 days, 7 days, and 28 days are recorded to be 46.73 MPa, 53.25 MPa, and 54.59 MPa, respectively. Specimens with 100% CG exhibit a prolonged setting time (122 min), but the compressive strength is just 21.80 MPa. Microscopic analysis reveals that specimens with 50% CG have smaller average pore diameters (22.84 nm) and a compact microstructure. These findings indicate that the GGBFS content significantly influences geopolymer performance, highlighting the effective utilization of GGBFS/CG wastes.
No takes yet. Share an insight, caveat, or question.
Xiao-ping et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: