Answers are grounded in this paper and cite their sources.
Novel terpene-based monomers improve printability and sustainability in 3D printing, indicating potential for eco-friendly materials.
Additive Manufacturing (AM), particularly stereolithography (SLA), offers great flexibility for producing complex structures. However, the limited availability of photocurable and sustainable resins remains a major challenge. Therefore, the development of ‘greener’ alternatives is imperative to establish a sustainable cycle within the AM industry. To address this, we developed a novel terpene‐based monomer, monoperillyl maleate (PeryMal), which is both degradable and cross‐linkable, offering a greener alternative to traditional petroleum‐based acrylic resins. The synthesis was carried out using the bio‐derived solvent 2‐methyltetrahydrofuran (2‐MeTHF) to further enhance sustainability. PeryMal was blended with the water‐soluble monomer ACMO at various ratios and successfully 3D printed. The ACMO‐blend 60, with the highest PeryMal content, showed excellent printability, a glass transition temperature (Tg) of 25°C–30°C, and thermal stability up to 400°C. It also demonstrated full degradation in alkaline conditions (pH 9) within 24 h and partial degradation at pH 2 over 28 days. To further improve sustainability, PeryMal was also blended with bio‐based isobornyl methacrylate (iBoMA). The resulting iBoMA‐blend 60 also printed well (PS 5) and exhibited a higher Tg of 65°C–90°C. These results highlight the potential of PeryMal‐based systems for creating sustainable, functional materials for SLA printing.
No takes yet. Share an insight, caveat, or question.
Krumins et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: