Answers are grounded in this paper and cite their sources.
Theoretical modeling reveals stress distribution patterns in hydraulic supports, indicating potential design improvements.
This study proposes a hierarchical mechanical analysis framework for three-level face guard units in large-mining-height hydraulic supports. Through theoretical modeling based on plane bar system theory, we establish a multi-body dynamics model considering the nonlinear coupling between discontinuous contact states and coal wall unevenness. Introducing compound variation coefficients ( k f , k s , k t ) and single-factor influence coefficients ( a i spo , b i spr ), the work quantitatively reveals the position-pressure coupling mechanism across hierarchical units. Experimental validation demonstrates 18.7% higher prediction accuracy compared with conventional integral rigid body models, particularly in second-level stress distribution (RMSE reduced from 4.32 to 3.51 MPa). Field data from Ningdong Mine confirm that the proposed overhanging design (>40 mm) reduces stress concentration by 32% at the upper plate edge. The stepwise cylinder diameter configuration (Level 1:200 mm > Level 2:180 mm > Level 3:160 mm) effectively prevents sequential failure risks under extreme loads. This research provides a theoretical foundation for optimizing multi-level face guard systems in 8 m+ ultra-high mining faces, addressing critical challenges in coal wall spalling control.
No takes yet. Share an insight, caveat, or question.
Mu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: