Answers are grounded in this paper and cite their sources.
This work demonstrates improved flow rates and backpressure in symmetric-drive piezoelectric pumps, highlighting design innovations in displacement amplification.
This paper proposes a resonant piezoelectric stack pump based on a two-stage nested rhombus displacement-amplifying vibrator in symmetric-drive mode. Two rhombus displacement amplifiers are connected in a nested manner to achieve exponential displacement amplification of the piezoelectric stack. Symmetric-drive mode is adopted to minimize the vibrating mass and inertial load in the displacement output direction of the piezoelectric vibrator, thereby improving its resonant frequency. A piezo-actuated two-stage nested rhombus displacement-amplifying vibrator was designed, and its output characteristics in fix-drive mode and symmetric-drive mode were analyzed theoretically and by finite element simulation. Two piezoelectric pumps were designed and fabricated with the same piezoelectric vibrator in fix-drive mode and symmetric-drive mode respectively, and their output performances were tested and compared. Under a sinusoidal driving voltage of 80 V, the piezoelectric pump in fix-drive mode achieved the maximum flow rate of 168.8 ml/min at the resonant frequency of 201 Hz and the maximum backpressure of 7.4 kPa at 203 Hz; while the maximum flow rate and backpressure of the piezoelectric pump in symmetric-drive mode reached 792.2 ml/min and 35.6 kPa at the corresponding resonant frequencies of 660 and 721 Hz.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: