Synapse
⌘+K
Synapse
PulseExploreClubsResearchersJournals
Instagram
HomeClubsExplore
September 10, 2025IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)

The Effect of Cutting Speed on The Surface Roughness of AISI 1018 Steel in the Dry Turning Process

View Full Paper
Ask AI
Bookmark
Share

Authors

YMYonathan Farrel MarcelinoMLMuhammad Sobron Yamin LubisRRRosehan Rosehan

Discussion

Loading...

Member takes

Overview

This study evaluates the relationship between cutting speed and surface roughness in AISI 1018 steel, indicating its importance in machining quality.

Key Points

  • Increasing cutting speed leads to a reduction in surface roughness, enhancing surface quality.
  • The lowest surface roughness achieved was 2.224 μm at a cutting speed of 105 m/min during machining.
  • Machining was performed using a chisel with a radius of 1.2 mm, assessing various cutting speeds.
  • This research demonstrates the critical role of cutting parameters in optimizing conventional turning processes.

Cite This Study

Marcelino et al. (2025) studied this question.

synapsesocial.com/papers/68c1b18554b1d3bfb60e8396https://doi.org/10.56862/irajtma.v4i2.209
View Full Paper
Ask AI
Bookmark
Share

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Investigation of the Effects of Cutting Parameters on Surface Roughness in Turning Operations2024
  2. 2Analysis Of The Effect Of Carbide Cutting Angle On The Surface Roughness Of Aisi 4337 Steel In Turning Axle Rail Shafts Without Cutting Fluid2025
  3. 3Influence of the Material Mechanical Properties on Cutting Surface Quality during Turning2024 · 2 citations
  4. 4Comparative Study of Machining Parameters of Single and Double Cutting Tools During Turning of AISI 1045 Steel2024 · 1 citations
  5. 5Finish turning of AISI 5140 tempered steel to improve machinability for engineering applications: An experimental approach with dry cutting2024 · 2 citations