Answers are grounded in this paper and cite their sources.
Analysis reveals fulvic acid enhances solidified sludge's resistance to permeability, indicating optimal composite curing ratios.
In order to explore the influence of composite curing agents on the permeability characteristics of solidified sludge under a fulvic acid environment, this paper adopts ultra-fine cementite-cement composite curing agent to cure the artificially prepared sludge with a moisture content of 70%, and explores the changes of the permeability characteristics of the samples soaked in pH 6.0 fulvic acid solution at different soaking ages with different dosages of composite curing agent. The micro-morphology of solidified silt was analyzed, and the micro-mechanism of solidified silt was revealed. The results show that the permeability coefficient of the sample has the same rule under different soaking ages, that is, with the increase of the addition of compound curing agent, the permeability coefficient of the sample decreases first and then tends to be gentle. Through the analysis of the permeability coefficient reduction rate, it is concluded that the best mix ratio of solidified sludge is when the addition of compound curing agent is 17.5% to the proportion of superfine cement is 12%, and fulvic acid is helpful to improve the permeability resistance of solidified sludge. According to the observation of the microscopic morphology, with the addition of a composite curing agent, the hydration products will increase the filling pores, the pore connectivity will decrease, and the sample structure will gradually become dense. The proportion of large pores has a good correlation with the addition of a composite curing agent and the permeability coefficient of the sample, and the permeability resistance of the solidified silt will be significantly improved.
No takes yet. Share an insight, caveat, or question.
Hanyu Zhang (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: