Answers are grounded in this paper and cite their sources.
Feasibility study reveals induction thermography improves crack detection in steel, suggesting faster industrial applications.
This work investigates the potential of induction thermography for quantitatively assessing surface-breaking cracks under dynamic inspection conditions. Experimental tests were conducted on S355J2 steel specimens with artificial notches of varying depth and length, scanned at a constant speed of 4 km/h. A thermal contrast-to-noise ratio was computed for each crack and correlated with its geometry in terms of length and depth using a power-law calibration, enabling an empirical probability of detection (POD) curve derivation. A Finite Element Model (FEM) was used to simulate the electromagnetic-thermal response and physically interpret the contrast variation with depth. The results demonstrate the feasibility of depth and length quantification under motion and support induction thermography as a fast, non-contact method for both crack detection and characterisation in industrial environments.
No takes yet. Share an insight, caveat, or question.
D’Accardi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: