Quality control of plastic scintillators for the total-body J-PET scanner

The construction of the total-body Jagiellonian positron emission tomography scanner requires component verification before detector assembly. The purpose of this research is to verify the quality of BC-408 plastic scintillators with dimensions 6 mm × 30 mm × 330 mm. The scintillators were inspected for optical and mechanical defects and all dimensions were measured. Scratches, mechanically damaged corners and edges, as well as encapsulated dust and fibers within the scintillators, were identified under ceiling lamp illumination. Line defects on the as-cast surfaces were easily visible in a plane polariscope setup consisting of crossed horizontal and vertical polarizer foils. The transmittance at the wavelength of maximum emission through 6 mm thick scintillator samples and the technical attenuation length along 330 mm long scintillator samples were measured on a linear CCD array spectrometer for randomly selected scintillators from each delivered batch. Selected properties of the emission spectra, such as their FWHM and the values of the emission maxima as a function of the distance between the excitation point and the spectrometer fiber, were measured. Additionally, the scintillators optical homogeneity was measured on a light transfer setup consisting of an LED and photodiode matrix. The majority of the obtained plastic scintillators meets the transparency criteria and falls within the dimensional tolerances.