Answers are grounded in this paper and cite their sources.
Numerical simulations reveal how chamber corner fillet geometry improves energy capture performance in L-OWC devices, indicating better efficiency across wave conditions.
This study investigates the effect of chamber corner fillet geometry on the wave energy capture performance of an L-shaped Oscillating Water Column (L-OWC) device. Numerical simulations were conducted in FLOW-3D at a 1:20 scale, using representative wave conditions from Northeastern Taiwan, to evaluate the energy conversion efficiency of breakwater-integrated OWCs under various wave periods. The analysis focuses on the effect of varying corner fillet dimensions at three key locations of the L-OWC: the water inlet fillet (LR1), the upper chamber fillet (LR2), and the bottom chamber fillet (LR3). To optimize energy capture, the Impeller Model in FLOW-3D was employed, with systematic adjustment of the accommodation coefficient for rotational velocity (Ad) to determine the optimal Power Take-Off (PTO) damping coefficient. Simulation results indicate that the filleted L-OWC model achieved a 16.1% increase in capture factor compared to the baseline configuration (model without fillet). The optimal corner fillet radii were identified as 180 mm for LR1, 90 mm for LR2, and 90 mm for LR3. The introduction of corner fillets was found to enhance internal flow velocity, increase volumetric airflow, and improve water level oscillations, thereby significantly improving the system’s energy capture efficiency.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: