Answers are grounded in this paper and cite their sources.
Quasi-single-mode signal output improves side-mode suppression ratio in sapphire fibre Bragg gratings, indicating enhanced spectral quality.
In this study, we demonstrate a method for achieving quasi-single-mode signal output in sapphire fibre Bragg grating (SFBG) based on single-mode fibre offset coupling measurement. A few-mode spectral output of SFBG was obtained by directly coupling a single-mode silica fiber to the SFBG. The effects of offset coupling distance on the side-mode suppression ratio (SMSR), peak reflectivity and wavelength of the SFBG reflection spectrum were studied. A significant improvement in SMSR was observed during the offset coupling process. The optimized spectrum achieved an SMSR of 3.5 dB, full width at half maximum (FWHM) of only 0.09 nm, and signal-to-noise ratio (SNR) of 10 dB. This method offers a straightforward and practical solution for enhancing the spectral quality of SFBG without requiring complex structural modifications to the fibre.
No takes yet. Share an insight, caveat, or question.
Niu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: