Laboratory Study on the Characteristics of Wetting-Induced Deformation for Compacted Granite Residual Soil

Granite residual soil is widely employed as subgrade fill material, but its tendency to undergo wetting-induced deformation under moisture infiltration poses significant challenges to pavement stability. To address this issue, this study introduces an innovative wetting device capable of precisely controlling moisture content increase, enabling multi-step wetting tests under controlled conditions. Saturated wetting tests were also conducted using both single-line and double-line methods, and the results were compared. Pore size distribution curves for granite residual soil samples with different initial states were measured using Mercury Intrusion Porosimeter (MIP) tests. Results indicate that for both the single-line method and the double-line method, the εV-lgp curve for samples subjected to different compaction efforts remains parallel across varying initial moisture content. The increase in vertical stress will constrain the water adsorption and swelling potential. Whereas an increase in compaction effort leads to greater swelling potential, which is mitigated by an increase in initial moisture content. By integrating the test results of the soil water characteristic (SWCC) curve, the relationship between normalized wetting deformation and matric suction is primarily influenced by the initial state of the soil sample and remains unaffected by vertical stress during multi-step wetting. Based on the test results, an empirical wetting prediction model was formulated, accounting for the influence of vertical stress, initial matric suction, and matric suction after wetting. Fitting results confirmed that the established model achieved high prediction accuracy (R2 > 0.9), supporting its application in practical engineering endeavors.