PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
September 19, 2025Frontiers in Environmental Engineering13 citationsOpen Access

Novel field trial for ocean alkalinity enhancement using electrochemically derived aqueous alkalinity

View Full Paper
ASAllison M. SavoieMRMallory RinghamCSCarolina Torres Sanchez

Key Points

  • Successful increase in pH across all discharge pulses indicates effective alkalinity enhancement.
  • Peak pH values of 8.3 showed desired alkalinity levels after release into Sequim Bay.
  • Assessment using an electrochemical system at a wastewater treatment plant confirmed feasibility.
  • The approach may provide a method for reducing ocean acidification effects in coastal environments.

Abstract

Ocean alkalinity enhancement is a proposed method of marine carbon dioxide removal that enhances the ocean’s uptake of atmospheric carbon dioxide (CO 2 ) and converts it to dissolved bicarbonate for long-term ocean storage. This method of marine carbon dioxide removal has been gaining attention for its potential to durably (10,000+ years) store large amounts of CO 2 (Gt + where 1 Gt = 1 × 10 9 tons), while potentially ameliorating acidification in the vicinity of the alkalinity release. This study focuses on a novel release of electrochemically derived aqueous alkalinity into Sequim Bay, WA, through a previously established wastewater treatment plant (WWTP). This research was made possible through the collaboration of industry, academic, and federal partners, which enabled the establishment of an Ebb Carbon electrochemical mCDR system at the Pacific Northwest National Laboratory in Sequim, WA, for ocean alkalinity enhancement field trials. During these field trials, pH was measured across the WWTP system from the initial alkalinity dosing, throughout the WWTP, and at the outfall. We use the NBS scale for pH throughout this study as it is the scale used in discharge permit limits specified for WWTP and NPDES regulation and compliance monitoring. The background pH NBS of Sequim Bay seawater was between 7.5 and 7.7 for the November and February field tests. The mixing tank’s pH NBS was raised to the maximum value permitted for the WWTP (9.0) and maintained across the system (±0.2) during the outfall releases. At the outfall, the elevated pH and alkalinity was quickly diluted, such that the region with a measurable signal was limited to within ∼2.5 m of the discharge pipe. We were able to successfully monitor an increase in pH NBS across all four pulses of alkalinity-enhanced seawater discharge during the February 2025 field trial, with peak pH NBS values of 8.3 or 8.1, as recorded by outfall-adjacent YSI Exo 2 sonde and SAMI-pH sensors, respectively. The alkalinity-enhanced seawater did not measurably alter the surrounding waters’ temperature, salinity, turbidity, or oxygen. This study provides proof-of-concept for a conservative small-scale release of electrochemically generated alkalinity-enhanced seawater from a coastal outfall.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Savoie et al. (2025) studied this question.

synapsesocial.com/papers/68d464e031b076d99fa63e72https://doi.org/10.3389/fenve.2025.1641277
Ask AI
Helpful
Bookmark
Share
View Full Paper