Design and Crushing Characteristics of Double-Rotor Vertical-Shaft-Impact Sand-Making Machine

The traditional vertical-shaft-impact sand-making machine has the problems of uneven discharge particles and discharge port wear. To solve these problems, the influence of the main structural parameters (number of impact rotors, angle of impact plates, angle of anvil, and number of teeth on the anvil) on sand production is researched through orthogonal testing and polar analysis. The results show that the parameters’ degrees of influence on the sand production rate are as follows: the angle of impact plates, the number of impact plates, the angle of the anvil, and the number of teeth on the anvil. The double rotor exhibits the best crushing effect when the number of impact rotors is six, the angle of the impact plate is 0°, the angle of the anvil plate is 0°, and the number of teeth on the anvil plate is 89. By taking the working speed of the double rotors as a factor, an equal-level uniform design table is constructed for the double-rotor crushing system. Polynomial regression analysis shows that the best crushing effect occurs when the accelerating rotor speed is 1200 r/min and the impact rotor speed is 585 r/min. Finally, the crushing characteristics of the double-rotor vertical-shaft-impact sand-making machine are simulated and analyzed to obtain the kinetic energy distribution of particles in the crushing chamber. The kinetic energy of particles in the main crushing area is determined, and the wear pattern of the discharge port and parts is identified.