Answers are grounded in this paper and cite their sources.
This analysis reveals the impact of geometric defects on fatigue performance in Ti‐6Al‐4V specimens, highlighting the role of surface proximity and printing quality settings.
Additive manufacturing (AM) has expanded significantly, particularly in aerospace; however, AM materials often have defects that impair fatigue performance. This study examines the geometry and morphology of critical defects in Ti‐6Al‐4V specimens produced using three printing quality settings, followed by hot isostatic pressing (HIP) or heat treatment (HT). We present an automated fatigue failure analysis framework using computer vision and AI to identify critical defects, measure surface proximity, and quantify 14 geometric and morphological features. The model achieved a mean IoU of 0.836 and approximately 10% error in feature measurement. Results show that surface proximity is the most influential factor on fatigue life, with near‐surface defects degrading performance for HT specimens with lack‐of‐fusion (LOF) defects. For HIP specimens, failure sources were typically within 0.16–0.6 mm from the surface. Additionally, for LOF defects, the ‐parameter model achieved with measured cycles to failure.
No takes yet. Share an insight, caveat, or question.
Lang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: