Fiber Bragg Grating Embedded 3D-Printed Insole with Commercial and Portable Reader for Stance Phase Determination

This paper presents development and application of a Fiber Bragg Grating (FBG) array embedded in a 3D-printed insole for ground reaction force (GRF) estimation. In this case, a 3D-printed insole is fabricated from a scanned commercial insole in which a 5-FBGs array is integrated. The FBGs are characterized as a function of the applied transverse force, where a mean sensitivity of 0.11 ± 0.10 pm/N was obtained considering all FBGs. A portable FBG signal acquisition system was connected to the FBG array embedded in the insole and tested for the GRF analysis in a healthy volunteer. The gait tests results indicate stance and swing phases of 41.0 ± 6.5% and 59 ± 6.5%, respectively, which are within reference values of the literature. Furthermore, a 0.904 R2 was found in the correlation analysis of the measured GRF response and the conventional M-shaped curve for the GRF in which all subdivisions of the stance phase were detected.