Interface engineering of co-evaporated Sb₂Se₃ solar cells using an ALD SnOx interlayer

Q: What type of study is this?

This is a Experimental Study study.

Van‐Quy Hoang; Jaebaek Lee; Geumha Lim; Amanat Ali; Bashiru Kadiri-English; Dong‐Hwan Jeon; Dae‐Ho Son; Hyo Jeong Jo; Dae‐Kue Hwang; Kee‐Jeong Yang; Eunkyung Cho; Jin‐Kyu Kang; William Jo; Shi‐Joon Sung; Dae‐Hwan Kim

doi:10.1039/d5el00031a

January 1, 2025EES solar.Open Access

Interface engineering of co-evaporated Sb₂Se₃ solar cells using an ALD SnOx interlayer

View Full Paper

Ask AI

Bookmark

Share

Key Points

The introduction of the ALD SnOx interlayer increases solar cell efficiency to 7.395%.
This approach significantly suppresses carrier recombination and blocks Sb diffusion.
Stabilizing the Sb2Se3/CdS interface is crucial for enhanced solar cell performance.
The technique targets improving co-evaporated Sb2Se3 solar cells for better efficiency.

Implication

Introducing an ALD SnOx interlayer improves efficiency and stabilizes the Sb2Se3/CdS interface in solar cells.

Abstract

Introducing an ALD SnO x interlayer at the Sb 2 Se 3 /CdS interface enhances co-evaporated Sb 2 Se 3 solar cells, achieving 7.395% efficiency by suppressing carrier recombination, blocking Sb diffusion, and stabilizing the Sb 2 Se 3 /CdS interface.

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Hoang et al. (2025) studied this question.

synapsesocial.com/papers/68d46fbd31b076d99fa6978a https://doi.org/10.1039/d5el00031a

View Full Paper

Ask AI

Bookmark

Share

Interface engineering of co-evaporated Sb₂Se₃ solar cells using an ALD SnOx interlayer

Key Points

Implication

Abstract

Discussion

Cite This Study

Interface engineering of co-evaporated Sb₂Se₃ solar cells using an ALD SnOx interlayer

Key Points

Implication

Abstract

Discussion

Cite This Study

Keep reading

Keep reading