Answers are grounded in this paper and cite their sources.
Study reveals friction heat generation in PBX simulant mixing, suggesting effective temperature control measures.
Because of the natural hazardous properties of propellants and explosives, the thermal safety of the process should be solved first when resonance acoustic mixing (RAM) is used in the propellants and explosives field. Taking plastic bonded explosive (PBX) simulant and aluminum powder as objects, the frictional heating power of the mixing process was tested, and under rigorous conditions, the frictional heating power of PBX explosive mixing was obtained, and the heat transfer power needed to realize temperature control was calculated. The interaction law of acceleration and mixing time in the mixing process was studied. Finally, the PBX explosive simulant was mixed under the condition of temperature control with the water jacket to verify the feasibility of the water jacket exchanger. The results show that the heating rate of the PBX explosive simulant mixing process is related to the state of material and acceleration, and the maximum heating rate is 0.0709 °C/s, which appears at the mixing stage with the acceleration of 30 g. According to the fitting curve of the aluminum powder heating rate, the heating rate of PBX explosive mixing under the condition of 100 g acceleration is 0.143 °C/s. By comparing the melting characteristics, decomposition characteristics, and explosion characteristics of single compound energetic materials and PBX explosives under different heating rates and temperature conditions, it is believed that the RAM process of PBX can safely mix for at least 30 minutes without any temperature control measures. If jacket temperature control measures are adopted, the thermal safety of RAM is within a controllable state.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: