Answers are grounded in this paper and cite their sources.
Experiment shows liquid density impacts slug characteristics in two-phase flow, suggesting design improvements for efficiency.
Airlift pumps are widely utilized in many industries including water treatment, oil and gas, and in aquaculture applications requiring simultaneous water circulation and interfacial mass transfer. Their ability to handle gas-liquid mixtures without mechanical moving parts offers unique advantage of included reduced maintenance in harsh environments. Also, this makes airlift pumps particularly effective for corrosive fluids, high-density fluids, slurries, and biofouling-laden applications, where conventional pumps face limitations. Understanding the performance of airlift pumps requires detailed characterization of the two-phase flow dynamics within the pump riser, particularly parameters such as slug velocity, slug length, and slug frequency. This will provide valuable insights into the complex two-phase flow mechanisms within airlift pumps, enabling optimized designs for challenging fluid handling applications. This study investigates the influence of liquid density on the behavior of Taylor bubble in an airlift pump riser, using high-speed flow visualization. Experiments were conducted in a recirculating two-phase flow loop, incorporating an airlift pump equipped with an angled axial air injector. Liquid densities ranging from 1000 to 1100 kg/m3 (adjusted via salt concentration) were tested. Air and liquid flow mass flow rates were precisely measured, and the Taylor bubble characteristics were captured using high-speed imaging. Results showed that as liquid density increased, the required airflow rates to achieve the same lifting capabilities also increased, leading to a decline in pump efficiency. The length of Taylor bubble responsible for enhanced pumping performance were found to decrease with increasing density, measuring approximately 11 cm and 9 cm for liquid densities of 1000 kg/m3 and 1100 kg/m3, respectively with corresponding slug velocities of 91 cm/s and 79 cm/s. The results are able to demonstrate the dependence of airlift pump performance on liquid density and pumping efficiency.
No takes yet. Share an insight, caveat, or question.
Rosettani et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: