Answers are grounded in this paper and cite their sources.
This approach predicts erosive wear in granular materials for solar power systems, indicating computational models for high temperatures.
Solid particles are of interest as heat transfer and energy storage media for Gen3 concentrated solar power generation and other technologies. Currently, there are no robust computational models for predicting the erosive wear of these granular materials at high temperatures or low velocities, as expected in the Gen3 systems. This work presents a method for erosion prediction using the discrete element method (DEM) in LIGGGHTS, a Newtonian solver that models granular media particle motion. By capturing secondary particle-surface impacts, this approach provides accurate wear predictions. The method proposed in this work was validated using the erosion model proposed by Arabnejad et al. with high alumina HSP 40/70 particles impacting stainless steel 316 surface at a 15 to 60-degree impingement angles. The results of these simulations were subsequently compared with experimental data by Gietzen et al. and found to predict within 5% of experimental wear values for large angles. The proposed methods allow for tremendous computational flexibility in simulation parameters and erosive wear models as we work to propose a high-temperature erosive wear model.
No takes yet. Share an insight, caveat, or question.
Johnson et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: