Answers are grounded in this paper and cite their sources.
Analysis reveals distinct surface morphologies in turbine blades from additive manufacturing and EDM, highlighting differences in performance.
Additive manufacturing (AM) offers significant advantages in turbine blade prototyping, including lower costs and higher efficiency compared to traditional methods like electrical discharge machining (EDM). However, AM and EDM produce distinct surface morphologies, which may affect cooling performance. This study used computed tomography (CT) to analyze internal surfaces of turbine blades with film cooling holes and pin-fins fabricated by AM and EDM. Results showed AM film cooling holes had 17.7% larger diameters, 8.6% lower roundness, 5.7% lower circularity, and 165.4% higher roughness than EDM holes. Surface roughness in AM holes was highly dependent on build direction, with unsupported surfaces being rougher. Similarly, AM pin-fins showed 15.9% larger diameters, 29.3% lower roundness, 20.6% lower circularity, and 198.6% higher roughness than EDM pin-fins. Geometry deviations and roughness increased with length in AM pin-fins, and the surface rough morphology in unsupported regions of pin-fins was more pronounced than in film cooling holes, indicating greater sensitivity to build direction. These findings underscore the differences in geometric accuracy and surface quality between AM and EDM, providing insights for optimizing turbine blade cooling feature manufacturing.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: