Answers are grounded in this paper and cite their sources.
Simulation findings reveal ridge-vortex diamond effusion improves cooling effectiveness in gas turbine blades, implying better temperature control.
The leading edge of a gas turbine blade encounters the most intense thermal load and substantial aerodynamic pressure, making it the primary focus of gas turbine cooling research. In this study, a novel diamond-type triply periodic minimal surface (TPMS) effusion in an innovative ridge-vortex cooling chamber is proposed to enhance the cooling effectiveness of the turbine blade leading edge. The overall cooling effectiveness (η) of conventional vortex cooling with cylindrical film holes and ridge-vortex cooling with the diamond effusion is revealed using infrared thermography within the blowing ratios (BR) of 0.67 to 2.0. Conjugate heat transfer (CHT) simulations, validated by the experiments, are conducted to illustrate the flow patterns and temperature distributions. The results indicate that for the vortex-film model, the high cooling effectiveness is concentrated towards the tip region due to the high discharge of coolant from the film holes, whereas the ridge-vortex cooling with the diamond effusion results in more evenly distributed cooling effectiveness across the leading edge. Within the range of studied BR, the ridge-vortex-diamond model demonstrates higher area-averaged η than the vortex-film case by up to 21.8%, with a similar pressure loss. The ridged wall minimizes the vortex flow inside the leading edge cavity, and the diamond holes generate a more coolant attachment than those in the vortex-film model, particularly on the suction surface. Overall, the ridge-vortex-diamond effusion significantly enhances the cooling effectiveness and improves the temperature uniformity on the blade leading edge, especially at high BR.
No takes yet. Share an insight, caveat, or question.
Yeranee et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: