Answers are grounded in this paper and cite their sources.
Numerical analysis reveals non-uniform crossflow affects film cooling characteristics in turbines, highlighting important implications for efficiency.
To investigate the effect of crossflow within turbine blades on film cooling characteristics, a numerical study was conducted. An in-house GCFD code was employed to simulate the impact of the non-uniform variation in coolant flow across a limited channel on film cooling characteristics. The research focused on a 15-hole cylindrical film cooling plate, where the coolant flow channel is perpendicular to the mainstream flow channel in space. The flow area of coolant is equal to the total cross-sectional area of all film cooling holes. Results show that the non-uniform crossflow inlet condition and downstream blockage introduces different tangential momentum proportions to the entrance of each film hole, causing changes in the flow structure of the holes. The interaction between holes further leads to different characteristics of film coverage, including windward and leeward deviations, and symmetric distribution. As the blowing ratio increases from 0.2 to 1.5, the non-linear variation of parameters intensifies. Additionally, the ratio of the maxi-mum discharge coefficient to the minimum discharge coefficient decreases, reaching a minimum value of 1.04. The ratio of the maximum space-averaged cooling effectiveness to the minimum space-averaged cooling effectiveness increases, with a maximum value of 3.06.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: