Answers are grounded in this paper and cite their sources.
This research demonstrates the fabrication of siliceous monoliths with controlled hierarchical porosity, indicating significant improvements in material characteristics.
Self-standing siliceous monoliths bearing hierarchical porosity have been synthesized while combining the sol–gel process, complex fluids, and a planetary mixer. The mechanically well-defined and a priori reproducible stirring procedure leads to a precise control over the final hierarchical porous characteristics of the materials: Both the macroscopic cell and interconnecting throat dimensions in the monoliths, i.e., macroporosity, can be tuned by choosing the rotation speed. The fabrication process also leads to well-defined macrocellular wall thicknesses that can be tuned in the range of 30–90 nm by stirring control. Final high internal phase emulsion-based siliceous materials, Si(HIPE), are offering around 80–90% porosity, decreasing with stirring speed, and a broadly mixing invariant BET specific surface area of about 860 ± 60 m2 g–1, where the microporous surface area is rather constant at 480 ± 20 m2 g–1, with the BJH (mesoporous) area being more spread in the range of 380 ± 80 m2 g–1.
No takes yet. Share an insight, caveat, or question.
Vardon et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: