Answers are grounded in this paper and cite their sources.
Injection of a polyol-based demulsifier alters viscosity and phase inversion in water-in-oil emulsions, suggesting effective solutions.
Flowing water‐in‐oil (W/O) emulsions is one of the main problems in oil production lines, due to the exponential increase in viscosity with increasing water content. The formation of these kinetically stable emulsions is provided by natural petroleum surfactants that migrate to the water/oil interface, preventing coalescence between drops. The injection of chemical demulsifiers appears as an alternative to solve these problems. In order to study this alternative, a polyol‐based demulsifier was injected into a pipeline circuit with W/O emulsions flowing inside it. The results showed that the injection of demulsifier at concentrations above 500 ppm in emulsions with high water content (above 40 %) promoted the anticipation of the phase inversion point. At lower concentrations (below 300 ppm), there was only a reduction in the apparent viscosity, with a maximum reduction of 32 %. The rheological analysis showed that the demulsifier made the droplet interface less rigid, favoring coalescence.
No takes yet. Share an insight, caveat, or question.
Bonetti et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: