Soft Starter for Three Phase Induction Motor

An induction motor draws current more than the rated capacity during starting phase which might damage stator windings of three phase induction motor. To avoid the problem of high starting current, voltage is increased gradually from lower to higher level using smooth and soft starters. A smooth and soft starter is employed in a three phase induction motor to eliminate the surge in current and electromagnetic torque during starting. The surge in current and torque are eliminated temporarily using soft started at the time of starting. This in turn reduces the stress applied on an electric motor and shaft attached with rotor. The soft starter also eliminates the unwanted effects in electric cables and power distribution network. This paper provides a detailed description of soft and smooth start to an induction motor. At the time of starting, an induction motor draws significant amount of current from the supply and this drawn current is higher than the rated current of three phase induction motor. The motor reaches the full rated speed instantaneously as soon as the voltage is applied. The smooth start of three phase induction motor is based on the delay angle of TRIAC circuit. The firing angle is delayed during starting and delay angle reduces as the motor picks up the speed. The firing delay angle is further reduced to zero when motor reaches full speed. This proposed technique provided reduced voltage at the time of starting and full rated voltage when motor reaches full speed. Due to proposed technique, motor starts at a slow speed and gradually increases to full rated speed. By using soft starters, performance of induction motor is improved and it also improves load torque characteristics. Keywords—TRIAC triggering, firing angle delaying, opto-isolators, zero crossing detector circuit.