Answers are grounded in this paper and cite their sources.
This study demonstrates enhanced biomass oxidation using thermal analysis and iron oxide catalysts, indicating improved gaseous product composition.
The process of biomass pyrolysis was investigated using synchronous thermal analysis coupled with mass spectrometric analysis of gaseous products, both with and without an iron oxide catalyst, at a heating rate of 10 °C/min. A catalyst testing methodology was developed. The application of a universal method for studying chemical processes in various gas environments ensures the reproducibility and verifiability of test results. Iron oxides, such as magnetite (Fe₃O₄), were practically applied. Iron oxide nanoparticles and a magnetite/carbon catalyst were synthesized via the Elmore method through chemical co-precipitation from a mixed solution of ferrous (Fe²⁺) and ferric (Fe³⁺) iron salts. The use of the catalyst enhances the degree and rate of biomass oxidation and significantly influences the composition of the resulting products. It was observed that increasing the temperature leads to the oxidation of carbon to carbon monoxide and the reduction of magnetite to metallic iron. Analysis of pyrolysis products by mass-to-charge ratios (m/z) revealed an increase in the proportion of light hydrocarbons (C₁–C₄) and oxygen-containing compounds, alongside a decrease in long-chain alkanes and oxygen-containing aromatic compounds. Individual compounds were identified based on characteristic mass fragments. For example: methane (CH₄): m/z 15 (CH₃⁺), 14 (CH₂⁺), Ethylene (C₂H₄): m/z 27 (C₂H₃⁺), 26 (C₂H₂⁺). The study of gaseous product composition, solid residue mass, and thermal effects of the catalytic process forms the basis for calculating material and heat balances during key stages of biomass pyrolysis. An example of data processing using formula and stoichiometric matrices is provided. A system of independent reactions was derived from the stoichiometric matrix. The material balance function was formulated as a function of time and temperature. Based on differential scanning calorimetry (DSC) data and material calculations, an algorithm for determining the equilibrium composition of the products was developed. For citation: Yashkova D.N., Smirnov N.N., Kunin A.V. Using synchronous thermal analysis for studying catalytic pyrolysis of biomass. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 10. P. 117-123. DOI: 10.6060/ivkkt.20256810.7251.
No takes yet. Share an insight, caveat, or question.
Yashkova et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: