Answers are grounded in this paper and cite their sources.
This design improves beam steering alignment in fighter jets, optimizing performance during terrain-following mode with inertial compensation.
Active electronically scanned array (AESA) radars, which are usually a fighter jet, can operate in terrain-following (TF) mode to generate a terrain profile based on TF scan commands. During this operation, the AESA radar must control the beam steering angle so that it aligns with the TF scan coverage commanded by the terrain-following computer as accurately as possible. However, the fighter jet may experience various maneuvering conditions, such as a six degrees-of-freedom motion, at speeds of hundreds of knots. Therefore, the AESA radar must control the beam steering angle using a full inertial compensation function to account for changes in its own-position and attitude caused by airborne platform maneuvering. This compensation is essential even when the interval between beam steering commands is a few milliseconds. This paper focuses on the system architecture for achieving full inertial compensation and explores its effectiveness in improving the alignment between the beam center and the point of interest within the flight envelope for the TF mode operation of the AESA radar.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: