Answers are grounded in this paper and cite their sources.
Bistable states for a sufficiently large amount of liquid can appear in an eccentric capillary due to the eccentricity effect under zero gravity ( J. Fluid Mech , vol. 863, 2019, pp. 364–385). A transverse body force, which can lead to rich physical phenomena of a droplet, may lead to multistable states (bistability, tristability and the likes) of a sufficiently large amount of liquid in a capillary. We theoretically investigate this situation in a circular or annular capillary tube under a transverse body force. The results show that there can be tristable (bistable) states in an annular (circular) capillary tube: an occluding configuration and two (one) non-occluding configurations. In the annular tube, for one of the non-occluding configurations, the gas–liquid interface in the middle cross-section of the droplet meets both the inner and outer walls of the tube (bridging configuration); for the other non-occluding configuration, the gas–liquid interface in the middle cross-section of the droplet does not meet the inner wall (non-bridging configuration). The multistability is dependent on the Bond number, the contact angle and the cross-sectional shape. The multistability cannot occur for a zero or very large Bond number. A hydrophilic condition (the contact angle smaller than 90°) contributes to the non-occluding non-bridging configuration, while the hydrophobic condition (the contact angle larger than 90°) contributes to the non-occluding bridging configuration (only for the annular capillary). For the annular capillary with a not-so-large contact angle, increasing the inner-to-outer radius ratio can lead to a larger range of Bond numbers, in which the multistability occurs.
No takes yet. Share an insight, caveat, or question.
Tan et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: