Development and Evaluation of Insulation Materials for Deepwater Cementing

Marine oil and gas resources are abundant in deepwater regions, where the shallow seabed harbors natural gas hydrate layers due to the cold temperature and high-pressure environment. Hydrates are prone to thermal decomposition, which can compromise the integrity of cement sealing and even lead to accidents like blowouts. While current low-hydrated heat cement systems mitigate hydrate decomposition from cement hydration heat during the waiting period for cementing, they do not address heat transfer from deep strata to shallow hydrate layers through fluid circulation in the tubing during deep oil and gas development. Rather than utilizing costly pipe insulation technology, adjusting the thermal conductivity of well cement emerges as a cost-effective approach to prevent heat loss in the wellbore to the hydrate layer and thus inhibit hydrate decomposition. The critical aspect lies in utilizing insulation functional materials. This study delves into the functional and structural design of insulation materials suitable for cement slurry systems in well cementing, outlining the preparation methods and processes for two insulation materials (SDBW and SDBW-II) tailored for deepwater well cementing. SDBW and SDBW-II are both nuclear shell structural materials. The core is made of high-strength hollow microspheres, produced by using a reverse suspension polymerization method to form spheres followed by high-temperature sintering. The shell consists of a wear-resistant BPA epoxy resin layer, with the surface of SDBW-II also containing highly reflective glass microspheres. Incorporating 20% of material SDBW into the cement reduces the thermal conductivity of the cement stone from 0.8 to 0.31 W·(m·K)