Answers are grounded in this paper and cite their sources.
Purpose of the research. Using numerical methods, conduct a study of the optimal position of the leading edge of the impeller blade and determine the influence of this parameter on the main integral parameters of the flow path.Materials and methods. The search for the optimal position of the leading edge of the impeller blade was carried out using mathematical modeling of the three-dimensional flow of a viscous fluid in the computational domain of the object under study. Calculation models of flow parts – full-size; consist of impellers, diffusers, inlets, outlets, and front and rear gap seals. Using the computational fluid dynamics (CFD) software package, calculations were carried out for different positions of the leading edge of the impeller blade.Results. A numerical research of the position of the leading edge showed that its optimal position for ns = 70, 100 and 125 corresponds to the values Z ̅_avg = 0.095; 0.15 and 0.17 respectively. A stable falling shape of the pressure characteristic is provided for ns = 70 and n¬s = 100 at Z ̅_avg = 0.08 … 0.12, and for n-s = 125 at Z ̅_avg = 0.08 … 0.20. The blade system with Z ̅_avg = 0.08 has the best cavitation qualities at n¬s = 70, at n¬s = 100 with Z ̅_avg= 0.12, and at ns = 125 with Z ̅_avg = 0.16.Conclusions. Numerical research and analysis of existing designs of multistage pumps showed that for the studied stage specific speed from the point of view of energy and cavitation parameters, the optimal relative axial position of the middle point of the leading edge, measured from the intra-channel part of the hub, for ns = 70 is in the range Z ̅_avg = 0, 9 ... 0.11, for ns = 100 in the range Z ̅_avg = 0.14 ... 0.16, and for ns = 125 in the range Z ̅_avg = 0.16 ... 0.18.
No takes yet. Share an insight, caveat, or question.
Ivanov et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: