Assessment of Accuracy of Spatial Object Localization by Means of Mono and Stereo Modes of Visual-to-Auditory Sensory Substitution in People with Visual Impairments (a Pilot Study)

The aim of the study is to assess the accuracy of spatial object localization in mono and stereo modes of visual-to-auditory sensory substitution by means of the developed system tested on persons with normal or corrected-to-normal vision.Materials and Methods.A prototype of a visual-to-auditory sensory substitution device based on a video camera with two lenses was prepared.Software to convert the signal from a video camera into an audio signal in mono and stereo modes was developed.To assess the developed system, an experimental study with 30 blindfolded sighted participants was conducted.15 persons were tested in mono mode, 15 -in stereo mode.All persons were trained to use the visual-to-auditory sensory substitution system.During the experiment, participants were to locate a white plastic cube with dimensions of 4×4×4 cm 3 on a working surface.The researcher placed the cube in one of 20 positions on the working surface in a pseudo-random order.Results.To assess the accuracy of the cube localization, deviations along the X-and Y-axes and absolute deviations were calculated.The general dynamics of localization accuracy was positive both in mono and stereo modes.Absolute deviation and X-axis deviation were significantly higher in stereo mode; there was no significant difference in Y-axis deviation between modes.On average, participants tended to underestimate the distance to the cube when it was on the left, right, or far side of the working surface, and overestimate the distance to the cube when it was on the near side of the working surface.Conclusion.Tests demonstrated that the accuracy of object localization in stereo mode can be improved by increasing the time for training the participants and by showing them more presentations.The results of the study can be used to develop assistive techniques for people with visual impairments, to manufacture medical equipment, and create brain-computer interfaces.