Innovative approaches to overcome inadequate measurements in heat pumps with non-fluorinated refrigerants

As the transition away from fluorinated refrigerants occurs due to F-gas and PFAS regulations, heat pumps face the challenge of adapting to new non-fluorinated refrigerants.Evaluating heat pump performance during this transition is challenging due to limited operational data on the new refrigerants.Conducting long-term tests to fully understand a heat pump's performance with all possible refrigerants is labor-intensive and economically burdensome.This study introduces two complementary reduced-parameter models to assess heat pump performance across multiple new natural refrigerants despite limited data.A transfer learning model, leveraging knowledge from existing data-rich refrigerants, has been developed to evaluate the performance of heat pumps using new, data-scarce natural refrigerants.However, due to the lack of transparency in transfer learning models, semi-empirical models are being developed in parallel.The semi-empirical models, across multiple natural refrigerants, are capable of analyzing the thermodynamics and heat transfer processes within the heat pump system by utilizing only limited easy-to-measure variables as inputs.The transfer learning model demonstrates high accuracy for all outputs across seven refrigerants with RRMSE all below 7%.In comparison, the semi-empirical models are less accurate, with RRMSE results under 25% for all parameters except compressor power.By integrating these two models, a comprehensive framework is established for assessing heat pump performance with both high accuracy and a deeper understanding of the system.