Bolted joint behaviour is a key parameter in predicting transmission tower performance. Various types of joints are based on the number of bolts and their configuration. However, a few types of these joints were tested or modelled. In the present study, the load-deformation response of transmission tower joints as a joint behaviour was predicted using a simplified numerical model. Then, available experimental load-deformation responses of joints were used to verify the results of the proposed model. In the last step, the joint behaviours of a 400 kV transmission tower were predicted with the proposed numerical model. Then, the evaluation of the tower's response was done with a numerical model in ABAQUS under testing loading conditions. Lastly, the deformation of a full-scale tested tower was compared with the numerical results. The numerical model results show a good agreement with the experimental results. The ultimate strength and its corresponding displacement at the full-scale model are predicted with an error of about 4%. Moreover, the failure mode of the transmission tower was not affected by the behaviour of the joints.
No takes yet. Share an insight, caveat, or question.
Sarmasti et al. (2024) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: