Multiple Strategies for Producing and Utilizing Ammonia Using Electrochemical Methods Using Transition Metal Based Electrocatalysts

Ammonia is one of the most important chemicals in fertilizer and industrial chemical production, stands as the world’s second-largest synthetic chemical (> 200 million tons). Additionally, its potential as a clean energy source is gaining attentions due to its carbon neutrality, high energy density, and ease of transport. Electrochemical ammonia production emerges as a 'green' method which minimize the carbon footprint. However, the development of effective systems to produce and utilize 'green' ammonia remains a significant challenge [1,2]. To enhance the efficiency of electrochemical systems, modifications in both catalyst and system design are mandatory. This presentation will introduce the electrochemical nitrogen reduction reaction (eNRR) using Cu-based catalysts [3]. For catalyst modification, we addressed copper’s challenge of its low affinity and activation potential for stable dinitrogen (N 2 ) molecules. This was achieved through phosphorus activation, which enhance the adsorption and activation of N 2 by creating electron-deficient Cu sites on the catalyst surface. System-wise, the poor solubility of nitrogen in aqueous electrolytes limits it’s the performance of the system. Addressing this, we applied a gas diffusion electrode (GDE) coated with polytetrafluoroethylene (PTFE) into the eNRR system. This setup establishes an efficient three-phase boundary among liquid water, gaseous N 2 , and the solid catalyst, thus facilitating nitrogen access to the catalytic sites. Our novel catalyst in a flow-type cell attains a Faradaic efficiency of 13.15% and an ammonia production rate of 7.69 μg h -1 cm -2 at -0.2 V RHE . These figures represent 3.56- and 59.2-times improvements, respectively, over a pristine Cu electrode in a conventional electrolytic cell. Additionally, the presentation will provide a brief introduction to the amorphous Ni-Cu electrocatalyst for electrochemical ammonia oxidation, which is an essential reaction for ammonia utilization [4]. We highlight its doubled ammonia removal efficiency compared to the Ni-Cu LDH electrocatalyst, underlining the potential of these developments. [1] Y. Zeng, C. Priest, G. Wang, G. Wu, Restoring the Nitrogen Cycle by Electrochemical Reduction of Nitrate: Progress and Prospects, Small Methods, 4 (2020) 2000672. [2] B. Yang, W. Ding, H. Zhang, S. Zhang, Recent Progress in Electrochemical Synthesis of Ammonia from Nitrogen: Strategies to Improve the Catalytic Activity and Selectivity, Energy Environ. Sci., 14 (2021) 672-687. [3] J. Kim, C.H. Lee, Y.H. Moon, M.H. Lee, E.H. Kim, S.H. Choi, Y.J. Jang, J.S. Lee, Enhancing Ammonia Production Rates from Electrochemical Nitrogen Reduction by Engineering Three-Phase Boundary with Phosphorus-Activated Cu Catalysts, J. Energy Chem., 84 (2023) 394-401. [4] J.H. Jang, S.Y. Park, D.H. Youn, Y.J. Jang. Recent Advances in Electrocatalysts for Ammonia Oxidation Reaction.Catalysts., 13 (2023) 803.