Answers are grounded in this paper and cite their sources.
High-k gate dielectrics have attracted a great deal of attention in the investigation of transistors due to their unique properties such as superior gate controllability. However, their integration into graphene field-effect transistors (GFETs) remains problematic and the physical mechanisms governing the performance of these devices are still not fully understood. In this study, the effects of post-annealing on GFETs utilizing the high-k HfLaO ternary oxide as the gate dielectric were comprehensively investigated. The HfLaO film was deposited on top of graphene by magnetron sputtering, and the device performance with various post-annealing temperatures was conducted. It was found that post-annealing temperature can effectively increase the dielectric constant through balancing the oxygen-vacancy defects and moisture absorption. Both the surface morphology of HfLaO and performance of GFETs were investigated, and the fabricated GFETs exhibit notable electrical performance enhancements. Specifically, GFETs with a 200 °C post-annealed HfLaO gate dielectric demonstrate the optimal device performance, featuring a minimal Dirac point voltage (VDirac) of 1.1 V and a minimal hysteresis (ΔVDirac) of 0.5 V. The extracted hole and electron mobilities are 4012 and 1366 cm2/V · s, respectively, nearly one order of magnitude higher than that of GFETs with as-deposited HfLaO. This work outperforms other existing GFETs utilizing high-k gate dielectric and chemical vapor deposition grown graphene in terms of both carrier mobility and on–off ratio. It is also noted that the excessive post-annealing temperature can negatively impact the GFET performance through introducing oxygen vacancies, increasing the surface roughness, lowering the breakdown voltage, and inducing recrystallization.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: