Key points are not available for this paper at this time.
To reduce the working coefficient and jitter of the three-electrode gas switch used in linear transformer drivers, a novel trigger method that uses a nanosecond pulse in cooperation with the microplasma jet generated by capillary discharge was developed. A microplasma jet was generated by the nanosecond trigger pulse and injected into the follow-up breakdown gap of the gas switch to decrease the working coefficient. The influence of capillary parameters on the development of the microplasma jet was simulated. The results showed that the microplasma jet significantly reduced the breakdown delay time, jitter, and working coefficient. Increasing the capillary length and decreasing the diameter results in better triggered breakdown performance. Furthermore, the gas switch triggered by a positive pulse exhibits a lower breakdown delay and jitter. Combined with the intensified charge coupled device's shooting results, it can be concluded that the microplasma jet has a distinct influence on streamer formation, which is important for improving the working performance of the gas switch.
Chen et al. (Thu,) studied this question.