DLS homemade setup: reviewing first and second-order coherence and autocorrelation concepts of a light source in the context of nanoparticle sizes synthesized by PLAL

Abstract The size of the nanoparticles (NP) is one of the most important and essential characteristics to know the properties of the synthesized nanostructures. The most common characterization procedures are related to Scanning Electronic Microscopy (SEM), Transmission Electronic Microscopy (TEM), and Atomic Force Microscopy (AFM). Unfortunately, from a practical point of view, they represent a time-consuming procedure and require expensive equipment, which limits its application to specialized research groups. Significant attention has been paid to Dynamic Light Scattering (DLS) as a simple, fast, and reproducible method for sizing nanoparticles. However, inadequate representation of the fundamental principles of DLS and data interpretation represents two of the most important challenges related to this technique. In this work we try to provide the fundamental principles of the DLS technique, the fundamental mathematical treatment of data obtained during the optical scattering studies and provide the MATLAB code to configure non-commercial DLS equipment. Additionally, analyzes of nanoparticles obtained by pulsed laser ablation of Ag, Au, Si and W and commercial Au nanoparticles were carried out. The particle size results are compared with SEM images to calculate the percentage error of the DLS measurements. The results show an error of 5%, 3.8%, 2.1% for the Ag, Au and Si nanoparticles respectively, which proves to be an excellent approximation to the real values of nanoparticle diameter. Meanwhile, the error in size for W nanoparticles by the same technique and commercial Au nanoparticle is 29% and 12%, which shows the effect of the hydrodynamic diameter of the nanoparticles. This work ends with the analysis of the concentration of nanoparticles and its importance in reliable results of DLS measurements.