Answers are grounded in this paper and cite their sources.
The development of nuclear technology has led to increased interest in radiation monitoring systems based on sensors and dosimeters that detect and measure ionizing radiation in a given environment. A gamma radiation (GR) sensor detects the presence of GR, while a GR dosimeter measures the amount of GR to which a person or object has been exposed. A thin film of Nano CuO/ZnO with a 90%:10% ratio on a Cu substrate was chosen to be fabricated using sol-gel method for GR sensing and dosimetry. This choice was the result of simulation of some metal oxides using a MATLAB program in one of my previous studies. The film was characterized as nano CuO/ZnO using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDXS) spectroscopy. Two silver paste electrodes were deposited on the film for Current-Voltage (I-V) characterization, which showed that the sensor behaved like a diode. The sensitivity of the sensor to GR was studied by irradiating it with different low doses of GR. The I-V curves of the sensor were measured after each irradiation, and the current-dose (I-D) curve was studied and plotted at a voltage of 0.5 V from which an equation for calculating the accumulated dose was deducted. The results show that the nano CuO/ZnO thin film sensor has promising properties for GR dosimetry applications in which the accumulated low dose of GR can be calculated.
No takes yet. Share an insight, caveat, or question.
Morsy et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: