Simulation Based Analysis of HK-Ge-Step-FinFET and Its Usage as Inverter & SRAM

This paper deals with comparative simulation of High-k dielectrics -Germanium Step FinFET (HK-Ge-Step-FinFET) device with reference Step FinFET. For the first time we have investigated the impact of various dimensional parameters like oxide thickness t ox , gate length L g , drain bias voltage V ds on the performance of Proposed and Reference FinFET devices. These FinFET structures have been designed and simulated in Sentaurus TCAD and Cadence Virtuoso. The electrical parameters such as current ratio I ON /I OFF , Sub-threshold Swing SS , Drain Induced Barrier Lowering (DIBL), threshold voltage Vth, gate capacitance, intrinsic delay and transconductance are extracted at 10 nm gate length. It is noticed that there is a significant improvement of 28 times and 23 times in I ON for proposed device over reference FINFET at V ds = 1 V and V ds = 0.5 V respectively, improvement in I ON /I OFF ratio from 8.05 × 10 8 to 6.65 × 10 10 , SS of 63.21 mV/decade to 61.5 mV/decade and excellent threshold voltage of 0.18 V in proposed FinFET. The characteristics of the proposed SRAM cell including, static noise margin (SNM), read/write delay, and subthreshold leakage power, are compared with the conventional 6 T SRAM cells. It is reported that the FinFET SRAM cell has RSNM, HSNM, and WNM of 285 mV, 360 mV, and 302 mV, respectively, at V ds = 1 V. Furthermore, the suggested device-based SRAM cell outperforms traditional SRAM cells at 1.0 V in terms of read noise margin, hold noise margin, and write noise margin, as well as leakage power. Thus, it may prove to be a viable option for lowering leakage components, making it effective for low-power and high-performance inverter and SRAM cell design in the nanoscale regime.